The aeronautics industry is without question a dynamic sector of activity where progress takes place at breakneck pace and where the players in the field have to deal with remarkable technological advances that follow each other at increasingly shorter intervals.
See the articleThere are industries and manufacturing processes that, even though they rely on technology, innovation and progress, have one foot in the past and one foot in the future. It’s namely the case of infrastructure companies such as water conveyance systems manufacturers.
See the articleDo you ever question the accuracy and reliability of your quality control (QC) process? Do you ever doubt the quality of your measurement setup, especially if you are a non-expert in 3D scanning?
See the articleINTAV SRL is an Italian company with more than 30 years of experience in designing and manufacturing luminous and acoustic warning devices for emergency, rescue, and operative vehicles.
See the articleThanks to the 3D scanner, SICIM SpA can detect complex geometries from machineries and their technical designers are supported in project developments.
See the articleAIC-Automotive Intelligence Center, based in Amorebieta-Etxano, Bizkaia, is a European center for the generation of value for the automotive industry based on a concept of open innovation where companies improve their positioning through cooperation.
See the articleThe TTK University of Applied Sciences uses the Go!SCAN 3D scanner in many projects for academic purposes by professors and students.
See the article3D scanning can be used to measure objects of art in order to assess their 3D dimensions accurately.
See the articleFollowing the example set by the FIA, M-Sport saw the need to introduce 3D scanning to control the body shell’s accuracy and ensure that the car met regulatory requirements. After all, winning performances often occur by pushing as close to the limit as practical while remaining compliant with regulations. 3D scanning proved to be the technology required to reach this balance.
See the articleSiemens Gamesa was looking for a 3D scanning system to take exact, agile measurements of wind turbines and their components so that they could be analyzed and processed using CAD software. The main goal was to dispense with traditional and inaccurate measuring tools such as tape measures and gauges, in favor of a more agile and precise method.
See the articleThrough its dimensioning and tolerancing information, the technical drawing speaks a language that is intended to be common to all. It is made of a set of very precise standards, symbols, and rules that convey the geometric characteristics and tolerances of a part.
See the article3D laser scanners are a hot topic these days. 3D laser scanning is an advanced technology with a market growth forecasted by some reports to grow at a CAGR of 7.5% from 2021 to 2026. Other research indicates that the 3D laser scanner market will likely reach $16.66 billion by 2030.
See the articleComputer-aided design (CAD) is defined as the use of computers to assist in the creation, modification, or optimization of a design. CAD software enables designers and engineers to model shapes and add features with the ultimate goal of producing parts.
See the articleThe ability to quickly achieve accurate dimensioning of components of any shape and size with a 3D scanner was for AADS a key factor to choose a Creaform scanner.
See the articleRohde & Schwarz uses the HandySCAN 3D for quality control, measuring vehicle interiors, inspecting free-form surfaces, and additive manufacturing processes
See the articleAutomotive manufacturers and suppliers around the world have used portable 3D scanning systems for product development, vehicle design and quality assurance. Everything from individual components to complete vehicles can be measured.
See the articleAngelo Cappellini, producer of essential and timeless furniture, relies on Go!SCAN 3D when it comes to developing exclusive furniture drawings.
See the articleIn order to enhance its metrology equipment, Blacks decided to acquire the portable 3D scanner MetraSCAN BLACK from Creaform.
See the articleDid you know that Creaform has implemented more than 10,000 measurement technology projects and engineering service projects worldwide in the last 15 years? Customers include leading international manufacturers in the aerospace, mass transit, energy, leisure items and consumer products sectors.
See the articleSpania GTA is on a mission to build a limited-production supersports, the Spania GTA Spano, with unmatched handling, advanced technology and innovative aesthetics.
See the articleBBI Autosport recently took on the development of three Porsche race cars for the 99th Pikes Peak International Hillclimb, fondly known as the “Race to the Clouds” and one of the most reputed and arduous car racing events in the world.
See the articleRecently, the Jules Verne Technological Research Institute (IRT) developed a new robot, belonging to the category of cable-driven parallel robots. The latter has been evaluated using Creaform technologies.
See the articleThe story of how 3D scanning has helped CageKits to develop a better design process that leads to better structural benefits for the customers
See the articleAftermarket: 3D scanning as a preliminary step in the production of prototypes and samples of accessories for custom bikes ABM Fahrzeugtechnik GmbH has been developing high-quality accessories for motorcycles of…
See the articleABM Fahrzeugtechnik GmbH uses HandySCAN and VXelements to develop high-quality accessories for motorcycles with passion for over 30 years.
See the articleThe story of how 3D scanning helped a drift master to design a unique mechanism that enabled him to go back on the track and drift again.
See the articleThe design team for the New York Yacht Club’s American Magic is continuing to drive innovations with the HandySCAN 3D, MaxSHOT 3D, MetraSCAN 3D and HandyPROBE CMM.
See the articleThe electrification of vehicles has gotten a lot of ink and airtime over the past few years as a compelling alternative to traditional fuel-powered cars and trucks. But did you…
See the articleCAD software are key elements for companies’ product lifecycle management to shorten time to market, get better product quality, and lower cost. Without them, product development would be a lot…
See the articleAll industries need to think ahead and build better products as fast as possible. On the other hand, they have to make sure the components are in compliance with the…
See the articleIf you’re a media-savvy custom cars enthusiast, chances are you are familiar with Rob Dahm, an automotive Youtuber with more than 395,000 subscribers to his channel. You probably also heard…
See the articleWhat happens when traditional measuring arms no longer fit the bill when it comes to 3D measurement accuracy and flexibility in production environments? That is exactly what happened to Agrikon KAM…
See the articleObviously, we love all of the student teams and projects that we select to be part of our Creaform Student Project Sponsorship Program… But we have to admit that some…
See the articleLearn how Swiss sporting goods manufacturer, SCOTT Sports, integrated the HandySCAN 3D in the development of its new Symbol 2 Plus D helmet. #NOSHORTCUTS
See the articleKoenigsegg cars combine innovation and cutting-edge technology. The CCXR model shown above is, among other things, the world’s first green supercar. Koenigsegg hypercars have received a lot of attention lately…
See the articleIn the past few years, we have heard a lot about 3D printing in mass media, as if it was something that just came fresh out of the oven. For…
See the articleTo become a leader on the market you need to design products that offer more than competition. That’s why the Creaform Engineering Service is now giving you access to professional…
See the articleArianespace will be launching Brazilian telecommunication Embratel Star One C4 with Eumetsat MSG-4, a weather monitoring service satellite, today from the European Spaceport in Kourou, French Guiana (Flight VA224)….
See the articleEvery year multi-physics simulation tools come to market with ever increasing possibilities. So much that it is hard for companiesto keep up with the pace and exploit these new tools to…
See the articleJayhawk Motorsports, a team of 40 engineering students from the University of Kansas, is using the Creaform HandySCAN 3D scanner to create two racecars, including creating a powerful 3D model…
See the articleWe are always proud to see projects we have worked on make their entrance on the market. It’s even more exciting when the project comes from a new service offer…
See the articleWhen it comes to cars, what comes to mind when you think about Sweden is mostly the good old, reliable, sensible Volvo. But are the exciting, luxury, sporty vehicles only…
See the article3D found its way into different steps of the product design process, and has for many years. Whether it is for 1st developing the preliminary concept, proceeding with the ergonomics…
See the articleIn 2008 and within the scope of Creaform’s Annual 3D scanning contest, a team of Creaform employees scanned Bonhomme Carnaval, which earned them the 2nd position in the contest. Creaform…
See the articlePut us to the test… Once more! It is with great pleasure and anticipation that we introduce our third engineering contest, where one or a team of lucky participants will…
See the articleAn international company and global leader in business aviation service has turned to 3D modeling of the plane’s interior to design, produce, and assemble Boeing 737 BBJ2 furnishings. The project…
See the articleIt is amazing what passionnate and brillant what undergraduate engineering students can do when they focus their efforts on something (in this case, the creation a hybrid of a Volkswagen Jetta…
See the articleLast August, we launched the Put Us to the Test 2010 challenge. The 3 most challenging entries shared more than $25,000 in 3D engineerng services. Here are the highlights: Nothing is…
See the articleACCURACY AND RESOLUTION IMPROVEMENT When we think of future laser scanning, the first thing that comes in mind is an accuracy and resolution improvement. But this is not the big…
See the articleRemember in september when we scanned the HTT plethore. They published a video on youtube, have a look.
See the articleAfter having read an article in the French cad.magazine, I felt like discussing the subject. I feel the packaging industry is very innovative and keeps pushing back limits to pick…
See the articleI worked on a project where the client asked for a CATIA V5 file to start up the production of his product – a crash helmet. I found this project…
See the article
Need specific information ?
Ask an expert
